If you have a LAN setup and internet connection to use telkom-speedy, such as the following:

1. Client computer connected to the switch
2. Switch connected to an ADSL modem using a cable

So to integrate the ASUS WL-500W router to the network with the aim of expanding access network / Internet and the increasing number of clients that are connected in a network / Internet, configuration changes can be made as follows:

1. Client computer connected to the switch
2. Switch connected to an ADSL modem using a cable
3. ASUS WL-500W router is connected to a switch by using a cross cable.

With the intent that if the router ASUS has many constraints, only the computer connected to the network using the wireless to be hampered and the computer connected to the switch via UTP cable can still access the internet.

Some simple steps you can try to integrate your ASUS router, namely:

1. Use a laptop where the available LAN ports and wireless LAN port
2. Setting the IP Address and DNS Server in the second Local Area Connection and Wireless Network Connection to "Obstain an IP address automatically" and "Obstain DNS Server Address automatically"
3. Connect ASUS WL-500W router (eg via a LAN port) with a laptop using a cable.
4. ASUS WL-500W router is connected with the model using the ADSL cable.
5. Install ASUS Utility contained in the default router ASUS CD.
   
6. Run the utility EZSetup

If the wizard appears EZSetup do not forget to do:

1. Step 1 of the wizard that is pressing the button for 3 seconds ezsetup contained behind a router ASUS section until the power LED blinking on the router.
2. Step 2. click EZSetup
3. If everything was connected properly, will run three processes, namely detection of routers, configuring routers, and wireless activation.
4. If all ok, then we will dimingta to enter the Wireless Network name that we will create and password (minimum 8 digits), the others follow the default options.
5. For the choice of ISP Settings, select ADSLdan static IP, then input the IP for the router, the default 192.168.1.1, and if it clashed with the setting Speedy Can you replace such a 192.168.2.1, subnet mask 255.255.255.0, gateway 192.168.2.1
6. To control input the appropriate IP gateway settings on the speedy eg 192.168.1.1
7. Remove all connections to laptops

Fox network configuration as follows:

1. Client computer connected to the switch
2. Switch connected to an ADSL modem using a cable
3. ASUS WL-500W router is connected to a switch by using a cross cable.

Good luck, hope you are ready to use your wireless router.

Related Post : computers , hardware , info , product , Software , tips-n-trick